Norwegian version of this page

Sophus Bugge lecture rooms

User manual for the auditoriums and seminar rooms in Sophus Bugges hus.

Welcome screen

Trykk for å starte

This is the welcome screen shown when you first touch the control panel.

The empty screen

After the welcome screen you will get sent to the following screen. This means that the AV equipment in the room is turned on and that the microphones are active. 

Touchskjermens hovedskjermbilde

You can switch languages by touching the flag icons. 

Starting the projector

To start the projector, you must press the Projector button (second button on the bottom of the screen). A countdown will be displayed until the projector is ready to be used:

Prosjektoren starter opp og det telles ned på skjermen til prosjektoren er klar

On the Projector screen that's now open you also select the input source, which is the type of device/connection you wish to display the video signal from. On the right side of the screen you have up, down and stop buttons for controlling the canvas.

Selecting input source

When the countdown has finished and the projector is turned on, the screen will look like this:

Velg innkilde - Hva du ønsker å vise fra

The active input source is highlighted in bright blue.

Audio (sound)

Lydpanel - Justere volum på mikrofoner

On the Audio screen you can adjust the volume of the microphones and the PC in the room. The number of microphones varies between the auditoriums and seminar rooms.

Microphones marked with bright blue have been muted.

The volume coming out of the PC can be adjusted with the rightmost buttons on this screen.

The Blinds

The blinds in the room can be adjusted with the directional buttons on this screen:

Gardiner - Åpne og lukke dem


In all the lecture rooms in Sophus Bugges hus, you can adjust lighting with the control panel on the Lights screen:

Styre belysningen

The lighting system is split between the Front and Back sides in all rooms, and is adjustable in 25% intervals.


If you require assistance with the equipment, the last button on the panel takes you to a screen with contact information.

Kontaktinformasjon når du trenger hjelp i et undervisningsrom

System off

When your lecture is over, please don't forget to power down the equipment before leaving the room:

Systemet avslutter

This is important, especially for these two reasons:

  • All settings are reset to their defaults, which avoids causing trouble for the next person utilizing the room
  • The projector and other equipment will last longer
Published July 25, 2017 11:22 AM - Last modified Aug. 23, 2017 3:32 PM